Skip to product information
1 of 27

EZ Gains

EZDisc Super Lite (700c) 10-15 Watt Saving

EZDisc Super Lite (700c) 10-15 Watt Saving

Regular price £189.00 GBP
Regular price £219.99 GBP Sale price £189.00 GBP
Sale Sold out
Rim Depth

What's Included

  • Your EZ Gains SL Disc Covers (both sides)
  • Fixing bolts – for securing the disc covers together
  • Cable ties – for fixing the disc cover to your wheel
  • Wheel Protection tape and binding screw stickers x 2 (Inside & Out)
  • 4 x valve covers – to cover the valve opening - reusable up to 20 times as they are made from a high quality adhesive material.

Swirl decals purchased separately 

Approximate Weight (Complete Set)

Weight of each EZDisc Appx (Complete set):

20-49mm   = 625g

50-67mm   = 540g

68-79mm   = 540g

80-100mm = 440g

Incompatible Wheels

  • Vision 55 - Disc Brake
  • Roval C38 - 50mm Disc Brake (Please select the original EZ Disc for best fitting)
  • Shimano C24 - Rim & Disc Brake

Works but larger version needed to fit

  • Zipp 808 - 80mm Disc Brake
  • NSW 858 Rim & Disc Brake
  • Shimano C50 Dura Ace

Fitting Instructions

Instructions: (Please follow picture instructions for best fit)

(Please follow picture instructions below for best fit)

Equipment and tools:
-EZDisc covers
-EZDisc fixing packs
-Sprocket spanner
-Snips
-For those with disc brakes you may need an allen key, crank tool or a specific tool for removing brake callipers, Your disc comes with a pack containing; cable ties, retaining screws, valve covers and electrical tape.

 (Disc brake wheels remove the Rotor, in most cases you can use your cassette remover or an Alan key)

Step 1:

Place drive side of the EZDisc "this is the flat side with cable tie holes in" mark around the disc on both side with a pencil.

Add electric tape provided overlapping the line by 2-3mm, place EZDisc down as centrally as possible avoiding spokes and with the valve showing "the valve does not have to be totally central in the hole, at the same time line up as many holes as possible with the spokes.  Once this is done secure firmly with fixing tape.

 

 

Step 2:

(some EZ Disc have an extra binding screw hole please line this up as well)

Now your EZDisc is central and secure with tape, thread the cable tie through one of the holes located by a spoke, then thread it back through the hole located next to it (this should come back past the other side of the spoke) and fasten it around an individual spoke if possible, work your way around the EZDisc but do not pull fully tight. 

"please look at below pictures"

Re check the position of the EZDisc and pull cable ties tight from opposite sides, please pull as tight as possible to secure EZDisc, once this is done snip excess cable ties leaving around 5mm.

 

Step 3:

Now offer non-drive side up and add EZDisc retainer bolts, these should nip up to the disc but not indenting the disc, use a screw driver to lightly screw tight, removed tape your EZDisc should now be solid on the wheel.

 

 

Step 4:

You do not need the rim tape in most cases but can add a nice finish, in some cases it helps hold the rim flat to the wheel. The rim tape is made from very high tack black vinyl cut in to shaped segments for EZ application.

Again the dots are not a vital part to the application, these can be added by placing the screw in the middle of the dot and applying heat using a hairdryer and working your finger around the bolt.

 

 

Step 5:

Replace your cassette and disc brake "if you have one" and get ready to join 4,000 other EZ Riders all over the world and save minutes of your bike leg.

 

 

Important note, your might find in some cases the EZDisc slightly pops away from the the rim, this can be rectified by using different size binding screws supplied, if not supplied we will be happy to send these out. Also the rim tape can help secure this in place. "smaller screws around valve"

 

"Please see below an example of how to inflate your wheel".

In nearly every case so far you do not need to remove your disc or any screws to inflate your tyre, or even use a valve extender, this is the same case with a CO2 canisters you just need to be a bit forceful, don't worry the EZDisc is extremely robust. If you find this is impossible then please feel free to contact us for advice, you also may need to consider a different valve length.

The Ultimate EZDisc (Super Lite) this product has been wind tunnel tested, rolling tested at (Silverstone Sports Engineering Hub) and is as fast as a top end disc wheel, also made from a polycarbonate mix. When combined with the correct wheel it can weigh the same as a disc wheel. The EZDisc SL is 1/3 lighter then the original EZDisc with the same aero benefits.

Aerodynamic rear disc wheel covers for road racing bicycles turn your wheel into a disc wheel and enjoy meaningful performance gains of two minuets plus over 90k.

Custom engineered to fit all makes and models of wheels, brakes, and rim depth options.

(Patent Authorise)


BTF-CTT Legal / Used in UCI Races / Ironman Legal


      View full details

      The Science

      EZDisc Super Lite (700c) 10-15 Watt Saving

       

       

       

      Wind tunnel testing on January 31st 2023, with independent engineers at Silverstone Sports Engineering Hub and eight witnesses.  EZGains have validated, that an EZDisc + rear wheel across 7 Yaw angles and 40 - 50Kph compared even to a top end £2,500 Disc wheel.

      Attended: Jack Shayler (Pro Triathlete) Ben Redman (Top GB AG) Donald Brooks (Legend) Rosie Weston (Pro Triathlete) Max Bucky (GB AG) Clint Butcher (AG - Owner)

      The Ultimate EZDisc (Super Lite) this product has been wind tunnel tested, rolling tested and is as fast as a top end disc wheel, also made from a polycarbonate, when combined with the correct wheel it can weigh the same as a disc wheel 400g -600g depending on EZDisc SL size this is 1/3 lighter then the original EZDisc. 

      • The new EZDisc Super Lite is as strong, stronger then a disc wheel and when added to your own wheel the weight can be as light as a disc wheel only weighing around 400g-600g.
      • The EZDisc was tested at Silverstone Sports Engineering Hub and compared to a top end disc wheel “graph below at 40kph, the orange line is a EZDisc with a lower CDA".
      • The EZDisc team also went to the extent of proving that an EZDisc added to a good back wheel can match a good disc wheel, The EZDisc SL actually rolled at a lower watts required using exactly the same tyre and exactly the same conditions. “see rolling rig machine and rolling rig results EZDisc showing lower watts”.
      • The EZDisc has also been proven to add structure/stability to the bike and act as a disc wheel, also giving you the full whooshing sound.
      • Recent tests by Nottingham Trent university UK have proved that an disc wheel can add stability in windy conditions “thanks to Parcour and Notts-Trent Uni for running these tests”.
      • When using an EZDisc outside this can give you a push effect from side and rear winds and adds aero benefits with head on winds giving you on average saving of around 2 minutes and 30 seconds over a 90k route hilly or not, as outdoor tests were also carried out to show this.
      • You only have to buy one wheel !! this saves so much money and when traveling you always have the option to take of the EZDisc of if disc wheels get banned.

      So in short its as fast as a disc wheel, stronger then a disc wheel, saves buying two wheels its an absolute no brainer!!

      Tests 31st January 2023 using rim tape and a rider holding the exact position within the green lines set out from base ride.

      2nd Test March 2024.Test for confirmation for James Teagle Professional athlete, James being at the cutting edge of the sport were every second counts wanted confirmation the EZ Disc was as fast as his Disc wheel. "we are happy to say it was".

      EZ Gains Rear Wheel Disc Cover: One of the first areas riders look to upgrade for aero improvements are their wheels. In time-trial and triathlon racing, many people equip their bikes with a completely covered rear wheel or a full rear disc wheel. This blocks all air from getting caught in the rear wheel and keeps it moving past quickly. On windy days, the disc may also create a sail effect, pushing the rider even faster. But bolting one of these on is not cheap. Just that rear wheel alone can cost anywhere from (£1,000 to £4,000).To make this rear wheel advantage more accessible to the masses, the team at EZ Gains has created an elegant solution to this problem. They’ve developed a simple cover made of durable and lightweight material that slips over your existing wheel, connecting securely and creating the SAME aero gains as if you purchased a fancy rear wheel. In fact, some testing suggests that depending on the wheel you install it on, the cover may perform better than a full disc wheel due to the fact of what quality hub you have, cheap disc wheel or old one often means cheap or poor-quality hub, this means if you already have a good quality wheel and add the EZ Disc this can enhance your gains, as the aero gains between and Disc and EZ Disc identical. Testing this out ourselves, we found that installation was quite simple and could be done at home with the appropriate tools (most will need a lock ring tool). Once on the bike, the feel and performance was evident. It really showed its stuff on those fast descents, capturing an extra mile or two per hour in comparison to our 80mm deep section rear wheel.

      NOT ENOUGH ? ok lets take this one step further for you, Silverstone Sports Engineering Hub have recently developed a rolling resistance rig, this is to identify quiet simply "what rolls at lower watts given the exactly same test condition"

       

      Wheel 1 EZGains tested a sub £900 wheel and a EZDisc vs a £1,000 Disc wheel (Wheel 2), the results favoured EZGains.

       

       

      Wind Tunnel EZDisc Aerodynamics Testing

      The idea was to validate that putting one of these covers on your wheel actually makes you faster. Spoiler – it does! We had an array of quality carbon wheels of different depths with EZDisc covers for each, one aluminium box rimmed training wheel, one relatively cheap disc wheel and one relatively expensive disc wheel to play with. The test itself was with the wheels on my TT bike, with the wheels spinning, without a rider. Why? The rider adds far more drag than a wheel so unintentional movements can mask the differences the wheels make. We tested with wind speeds of 30, 40 and 50kmph, with wind angles of -15 degrees through to 15 degrees. The results were unequivocal! This graph shows lines, one per wheel, for the aerodynamic drag (the “CDA“), including the bike, against the wind angle (the “yaw”). It’s averaged across the wind speeds. The lower the CDA, the better. As you’d expect the training wheel performed worst (the top line in dark grey).Then there is a group of all the carbon wheels. Surprisingly the depths from 38 to 88 all performed similarly, with the deeper rims just outperforming the shallower ones at higher yaws. Then there is a grouping containing the real disc wheels and the disc wheels with covers. There’s very little difference between these. These distinct groupings show the disc covers improving the aerodynamics of the wheels up to the same performance as normal disc wheels! Bearing in mind these are a fraction of the cost, this is a pretty big finding! What do those figures mean in terms of racing? Plugging the differences between the wheels with and without the disc into a calculator or directly using the formula you can work it out the saving.

      The above tests were conducted using the EZ Disc and not using the rim tape in 2021 without a rider.

      That’s a pretty impressive improvement, especially considering these were some pretty high-end wheels to start off with. Comparing the aluminium box rim training wheel to the 88mm with an EZDisc cover or real disc wheels, you can see it’s practically the same time savings EZDisc / 88mm / 20mm "its clear difference with an EZDisc. We also in the earlier days used Aero Weenie to crunch the numbers from our tests, this is in real world.

      Outside Testing

      For our formal testing we manage all the variables as best we can. We conducted our repeat runs on the same hilly route, on the same day with one rider on one bike, just changing the rear wheel from a standard one to one with an EZDisc fitted. 

      When testing out door you will always get a more positive result then the wind tunnel testing as you will also have a "push factor" from side and rear winds, any front winds will travel over a smoother surface faster.

      We have now also had feedback for 100s of riders with over 5,000 EZ Disc riders confirming the below average time savings.

      EZ Disc TT Bike (Real World Data)

      90k TT Bike R

      180k TT Bike Rid

       

       Buy the EZ Disc SL today!

      Customer Reviews

      Based on 54 reviews
      96%
      (52)
      4%
      (2)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      D
      Danny Isaacs
      Brilliant product, can’t recommend enough

      I bought the EZ Disc Super Lite as I have a lovely DT Swiss wheel set and couldn’t afford to buy a disc wheel, and I’m so glad I made that choice. I used it for the first time at IM Wales - a hilly course - and it was fast, responsive and so much fun to ride. I didn’t feel extra weight on the climbs and it helped me move up from 70th out the water into the top 20 overall off the bike. For anyone in two minds, don’t hesitate, I can’t recommend it enough!

      K
      Karl john palmer
      After Sales Satisfaction

      Right, so where do I start? I ordered the EZ disc SL for my TREK SPEED CONCEPT as this product had been recommended to me by several Triathlon friends. Ordering was straight forward and arrived within 2 days. This is where my problems began, what should have been a relatively simple task to fit this to my rear wheel turn into a frustrating few hours. On delivery of the disc you'll receive a package with every fitting that you could probably wish for. ( TOP MARKS EZ) But unfortunately for me after trying every fitting I couldn't stop a slight rubbing on the back of my derailleur. After hours of failed attempts I contacted the team at EZ Gains After a chat with the team they came up with a solution.
      I was trying to fit the disc to a ZIPP 454 and the team immediately thought that it might be the SL disc being to thin for this wheel type and suggested that they send out the original disc type which is a little thicker a slightly heavier which they thought would sit correctly on the ZIPP 454 Wheel.
      This was sent out immediately and I received this the very next day. I fitted this disc and like the team suggested it fitted perfectly with no rubbing what so ever. So I apologise for this extremely long Review but felt that it can't go unmentioned that the after sales and support from the team at EZ Gains was absolutely Superb and can't recommend this company enough. #topproduct #topteam

      K
      Karl john palmer
      Ez disc cover

      I'm a little frustrated and disappointed to be totally honest. I was supplied with 4 different size fitting screws to complete the attachment of the EZ disc. Unfortunately I tried every size to eliminate the disc rubbing against the derailer whilst in 1st gear but with no joy. There seems to be a slight bulge in the disc. I've tried absolutely everything to resolved this problem with no joy.

      R
      Richard Canevez
      A Dish Wheel for Gravel?! Yes, you heard that right.

      While the vast majority of use cases of the wheel cover is for triathlon and time trial, I'm coming to you from the fire roads, single/double track, dirt trails, and occasional tarmac of gravel riding and racing.

      The aerodynamic benefits are of course well documented, so I'll leave that aside (and for those of you think that you're not riding fast enough on gravel to justify a dish wheel, well, that may be the case. But headwinds are still a pretty good argument...). There are a couple of other benefits I would like to mention to those of you thinking:
      a) Cost and availability: dish wheels are usually very expensive, and one that is rated for gravel is rare. There is only one that comes close: the HED Jet 180, which is over an order of magnitude more expensive to purchase. That is more than my entire wheelset and bike frame together. Gravel racers/riders who are dish-curious may find this the most economical and functional option as a result.
      b) Compliance: most dish wheels are extremely stiff due to shortened spokes. This stiffness works against you in gravel. This wheel cover does not suffer from that because the wheels spokes are still present and can flex as needed. As a result, it is far more comfortable than a traditional dish wheel, an emphasized consideration for gravel.

      Now how does it perform and feel? so far it is has held up well after 200 miles. Installation was relatively easy, and took about 1 hour to install. I have them covering a pair of Ibis D30 gravel wheels.

      So far they feel fast! I don't have real world metrics beyond feel, but I did grab my first KOM on them, so there's that.

      Long term, there are a few things I will be paying attention:
      - increased terrain roughness may eventually cause a breakdown in the adhesive strips holding the wheel down to the rim. These may need replacing sooner than other use cases, but we'll see over time.
      - Gravel means a wide range of terrain, including water. If water gets into the wheel, I can imagine that getting it out could prove to be a bit of a nuisance. Something to pay attention to if/when it happens for the first time.
      - Ditto for the valve cover. My first valve cover sticker is more or less trashed with grit and grime, and I've electrical taped it down so I don't run through my pack of 4 too quickly. I'm going to talk to a 3d printing studio to see if they can help me come up with a dirt and grime resistant solution.

      So that's it, I hope that helps! These issues below are things that haven't been too big yet, but something I will be paying attention to going forward. Regardless, as of now, I would highly recommend this cover for the dish-curious graveler.

      F
      Francis Asprodites

      EZDisc Super Lite (700c) 10-15 Watt Saving